Datasheet

SARA-R4/N4 series-AT Commands Manual
UBX-17003787 - R09

9Short Messages Service
Page 90 of 307
9.20Write concatenated message to memory +UCMGW
+UCMGW
SARA-R410M-02B SARA-R410M-52B SARA-R412MModules
SARA-N4
Syntax PIN required Settings saved Can be aborted Response time Error referenceAttributes
full Yes No No < 10 s +CMS Error
9.20.1Description
Stores one segment of a concatenated message (SMS-DELIVER or SMS-SUBMIT) to memory storage
<mem2> and returns the memory location <index> of the stored message. <Ctrl-Z> indicates that the SMS
shall be stored, while <ESC> indicates aborting of the edited SMS.
The command is supported only for text mode (+CMGF=1)
The entered text is preceded by a ">" (Greater-Than sign) character, and this indicates that the interface
is in "text enter" mode. The DCD signal shall be in ON state while the text is entered.
9.20.2Syntax
Type Syntax Response Example
Set AT+UCMGW=[<oa/da>],[<tooa/
toda>],[<stat>],<seq>,<max>,<iei>,
<ref><CR>
text is entered<Ctrl-Z/ESC>
+UCMGW: <index>
OK
AT+UCMGW="091137880",,,1,2,8,
32767<CR>
> u-blox reserves all rights to this
document and the information
contained herein. Reproduction, use
or disclosure to third parties without
express permi<Ctrl-Z>
+UCMGW:302
OK
AT+UCMGW="091137880",,,2,2,8,
32767<CR>
> ssion is strictly prohibited.<Ctrl-
Z>
+UCMGW:303
OK
Test AT+UCMGW=? OK
9.20.3Defined values
Parameter Type Description
<da> String 3GPP TS 23.040 [8] TP-Destination-Address Address-Value field in string format;
BCD numbers (or GSM 7 bit default alphabet characters) are converted to characters
of the currently selected TE character set (refer command +CSCS in 3GPP TS 27.007
[2]); type of address given by <toda>
<oa> String 3GPP TS 23.040 [8] TP-Originating-Address Address-Value field in string format;
BCD numbers (or GSM 7 bit default alphabet characters) are converted to characters
of the currently selected TE character set (refer command +CSCS chapter Chapter
4.10); type of address given by <tooa>
<tooa> Number 3GPP TS 24.011 [13] TP-Originating-Address Type-of-Address octet in integer format
(default refer <toda>)
<toda> Number 3GPP TS 24.011 [13] TP-Destination-Address Type-of-Address octet in integer format
(when first character of <da> is + (IRA 43) default is 145, otherwise default is 129)
<stat> String Indicates the status of message in memory:
• "REC UNREAD": received unread SMS messages
• "REC READ": received read SMS messages
• "STO UNSENT": stored unsent SMS messages
• "STO SENT": stored sent SMS messages (default value)
<seq> Number Sequence number of the current short message (1-255)