Datasheet

Depending on the Flash memory type, the NPi i.MX6ULL Dev Board is divided into
two different versions:

NPi i.MX6ULL Dev Board - 8G eMMC Version

NPi i.MX6ULL Dev Board - 256MB NAND FLASH Version
The breakout board mainly includes various peripheral interfaces and input and output,
IO expansion. Including but not limited to two 100M ethernet ports, one USB Host and
one USB OTG port, one 24bit RGB LCD Interface, 2x 40 Pin I/O expansion headers.
Features
Core Module

CPU: NXP MCIMX6Y2CVM08AB

Frequency: up to 800Mhz

DDR3L: onboard 512MB

Flash: onboard 256MB NAND

Operating temperature: -40
℃
~ 80
℃
Attention
The operating temperature here refers specifically to the Core module, and the temperature
range of the Breakout Board is narrower. The specific temperature range of the Breakout
Board has not been tested.
Breakout Board

Ethernet: 2 x 100M ethernet port

Power: 5V±2% DC jack

Display: FPC LCD interface (including 24 bit RGB and I2C touch control)

USB Host: 1 x USB Host Type A

USB OTG: 1 x USB OTG Type C

RTC: 1 x RTC battery slot

SD Card: 1 x micro SD card slot

User LED: 3 x LED

Key: 4 x multifunction key

Switch: 8-digit DIP switch, switching boot mode - USB/NAND/eMMC/SD

IO: 2 x 40pin header