Instructions

How to assemble it

 1. Remove the protect cover on the Acrylic enclosure, just remove the plastic.

 2. Mount the Raspberry Pi and GeeekPi USB Joystick board on the button of the

enclosure with M2.5x 18mm screws and nuts.

 DO NOT FORGET THE WASHER.

 3. Place all of the push buttons on the enclosure slice, and screw up the joystick on

the top board with short binding screws and nuts.

PAGE 1
How to assemble it  1. Remove the protect cover on the Acrylic enclosure, just remove the plastic.  2. Mount the Raspberry Pi and GeeekPi USB Joystick board on the button of the enclosure with M2.5x 18mm screws and nuts.   DO NOT FORGET THE WASHER. 3. Place all of the push buttons on the enclosure slice, and screw up the joystick on the top board with short binding screws and nuts.
PAGE 2
 4. Mount the loudspeaker to the front panel of the enclosure. Pay attention to the position of the loudspeaker.  5. Connect 3.5mm jack cable wire from Raspberry Pi 3.5mm jack port to USB Joystick board's 3.5mm jack port.  6. Connect USB-to-MicroUSB cable wire from Raspberry Pi's USB port to USB Joystick board's microUSB port.  7. Hook up wire cable to the USB joystick board, Please make sure the joystick connect to the right position on the board.  7.
PAGE 3
 8. Put the anti-slipper pat on the back of the enclosure.  9. Hookup raspberry Pi and TV with HDMI cable.  10. Download Game's ROM file and upload to the RetroPie, and then Insert TF card to Raspberry Pi and power it on.