Specifications

Integration instructions for host product manufacturers according to KDB 996369 D03 OEM
Manual v01
2.2 List of applicable FCC rules
FCC Part 15 Subpart C 15.247 & 15.207 & 15.209
2.3 Specific operational use conditions
The module is a module with BLE and WIFI2.4G and WIFI 5.1G and WIFI 5.8G functions.
Operation Frequency: WiFi 2.4G: 802.11b/ g/ n(HT20) 2412-2462MHz
802.11n(HT40) 2422-2452MHz
BLE: 2402-2480MHz
WiFi 5.1G: 5180MHz~5240MHz
WiFi 5.8G: 5745MHz~5825MHz
Number of Channel: WiFi 2.4G: 11 Channels for 802.11b/ g/ n(HT20)
7 Channels for 802.11n(HT40)
BLE: 40 Channels
WiFi 5.1G: 4 Channels for 802.11a
WiFi 5.8G: 5 Channels for 802.11a
Modulation: WiFi 2.4G: 802.11b CCK; 802.11g/n OFDM
BLE: GFSK
WiFi 5.1G: OFDM with BPSK/QPSK/16QAM/64QAM/256QAM
WiFi 5.8G: OFDM with BPSK/QPSK/16QAM/64QAM/256QAM
Type: ANT A: PCB Antenna
ANT B: Chip Antenna
Gain: WiFi 2.4G: 4.1 dBi (PCB ANTA) , 1 dBi (Chip ANTB)
BLE: 4.1 dBi (PCB ANTA) , 1 dBi (Chip ANTB)
WIFI 5.1G: 3.6 dBi (PCB ANT) , 4 dBi (Chip ANT)
WIFI 5.8G: 2.1 dBi (PCB ANT) , 4 dBi (Chip ANT)
The module can be used for mobile or portable applications with a maximum 4.1dBi antenna. The
host manufacturer installing this module into their product must ensure that the final composit
product complies with the FCC requirements by a technical assessment or evaluation to the FCC
rules, including the transmitter operaition. The host manufacturer has to be aware not to provide
information to the end user regarding how to install or remove this RF module in the user's manual
of the end product which integrates this module. The end user manual shall include all required
regulatory information/warning as show in this manual.
2.4 Limited module procedures
Not applicable. The module is a Single module and complies with the requirement of FCC Part
15.212.
2.5 Trace antenna designs
Not applicable. The module has its own antenna, and doesn’t need a host’s printed board
microstrip trace antenna etc.
2.6 RF exposure considerations