Data Sheet

Datasheet SHT3x-DIS
www.sensirion.com May 2018- Version 5 21/22
22 May 2018
5
multiple
multiple
2
2
6
7
7
7
9
9
10
10
11
14
VDD
min
=2.15V
Typo & formatting correction
Updated RH repeatability values in Table 1
Updated T repeatability and resolution in Table 2
Table 3
Updated VDD
min
and POR levels
Updated supply current values
Updated specification range
Updated soft reset time in Table 4
Introduced Table 5
Introduced “Ratings are only tested each at a time.” in section 2.3
Introduced After sending a command to the sensor a minimal waiting time
of 1ms is needed before another command can be received by the sensor.
In section 4
Removed: “The stop condition is optional.” in section 4.1
Updated label of Table 9 with “The first “SCL free” block indicates a minimal
waiting time of 1ms.
Updated section 4.5 to Upon reception of the break command the sensor
abort the ongoing measurement and enter the single shot mode.
Updated section 4.8 to Upon reception of the break command the sensor
will abort the ongoing measurement and enter the single shot mode. This
takes 1ms.
Updated Table 21