Data Sheet

174
Atmel | SMART SAM D21 [DATASHEET]
Atmel-42181G–SAM-D21_Datasheet–09/2015
Writing a one to this bit will set the DFLL Lock Coarse Interrupt Enable bit, which enables the DFLL Lock Coarse
interrupt.
z Bit 6 – DFLLLCKF: DFLL Lock Fine Interrupt Enable
0: The DFLL Lock Fine interrupt is disabled.
1: The DFLL Lock Fine interrupt is enabled, and an interrupt request will be generated when the DFLL Lock Fine
Interrupt flag is set.
Writing a zero to this bit has no effect.
Writing a one to this bit will set the DFLL Lock Fine Interrupt Disable/Enable bit, disable the DFLL Lock Fine inter-
rupt and set the corresponding interrupt request.
z Bit 5 – DFLLOOB: DFLL Out Of Bounds Interrupt Enable
0: The DFLL Out Of Bounds interrupt is disabled.
1: The DFLL Out Of Bounds interrupt is enabled, and an interrupt request will be generated when the DFLL Out Of
Bounds Interrupt flag is set.
Writing a zero to this bit has no effect.
Writing a one to this bit will set the DFLL Out Of Bounds Interrupt Enable bit, which enables the DFLL Out Of
Bounds interrupt.
z Bit 4 – DFLLRDY: DFLL Ready Interrupt Enable
0: The DFLL Ready interrupt is disabled.
1: The DFLL Ready interrupt is enabled, and an interrupt request will be generated when the DFLL Ready Interrupt
flag is set.
Writing a zero to this bit has no effect.
Writing a one to this bit will set the DFLL Ready Interrupt Enable bit, which enables the DFLL Ready interrupt and
set the corresponding interrupt request.
z Bit 3 – OSC8MRDY: OSC8M Ready Interrupt Enable
0: The OSC8M Ready interrupt is disabled.
1: The OSC8M Ready interrupt is enabled, and an interrupt request will be generated when the OSC8M Ready
Interrupt flag is set.
Writing a zero to this bit has no effect.
Writing a one to this bit will set the OSC8M Ready Interrupt Enable bit, which enables the OSC8M Ready interrupt.
z Bit 2 – OSC32KRDY: OSC32K Ready Interrupt Enable
0: The OSC32K Ready interrupt is disabled.
1: The OSC32K Ready interrupt is enabled, and an interrupt request will be generated when the OSC32K Ready
Interrupt flag is set.
Writing a zero to this bit has no effect.
Writing a one to this bit will set the OSC32K Ready Interrupt Enable bit, which enables the OSC32K Ready
interrupt.
z Bit 1 – XOSC32KRDY: XOSC32K Ready Interrupt Enable
0: The XOSC32K Ready interrupt is disabled.
1: The XOSC32K Ready interrupt is enabled, and an interrupt request will be generated when the XOSC32K
Ready Interrupt flag is set.
Writing a zero to this bit has no effect.
Writing a one to this bit will set the XOSC32K Ready Interrupt Enable bit, which enables the XOSC32K Ready
interrupt.
z Bit 0 – XOSCRDY: XOSC Ready Interrupt Enable
0: The XOSC Ready interrupt is disabled.