User Guide
Table Of Contents
- Table of Contents
- 1 Product Introduction
- 2 Quick Start
- 3 Device Installation
- 4 Network Configuration
- 5 SenseCAP Portal
- 6 SenseCAP App Instructions
- 7 API Instruction
User Guide (Tech Document)
© 2008-2019 Seeed Technology Co., Ltd. All rights reserved. www.seeed.cc
12 / 50
Gateway Installation
3.2.1 Gateway Installation Methods
⚫ Installing on a pole (Use the Mounts)
Firstly, use M5 self-drilling screws (included in the package) to fasten the 4 brackets onto the gateway. And
then use cable ties to fasten the gateway onto the pole. The recommended pole diameter is 70mm.
Put cable ties through the holes of the bracket and pull to fasten onto the pole. To get a better
communication range, it is recommended to mount the gateway 3 meters above the ground. If there are
tall buildings around, the gateway should be kept away from the building or mounted on top of the tall
building.