User Guide
Table Of Contents
- Table of Contents
- 1 Product Introduction
- 2 Quick Start
- 3 Device Installation
- 4 Network Configuration
- 5 SenseCAP Portal
- 6 SenseCAP App Instructions
- 7 API Instruction
User Guide (Tech Document)
© 2008-2019 Seeed Technology Co., Ltd. All rights reserved. www.seeed.cc
21 / 50
3.3.2 Installing the Sensor Node Bracket
Specially designed for installing SenseCAP Sensor Nodes, the bracket consists of a bracket and a sliding
cap. With designated screw-holes, the bracket helps fasten the Sensor Node firmly onto a pole or a wall.
1) To install on a pole, you can use zip ties to fasten the bracket (recommended pole dimension is 50-
70mm in diameter). Please refer to the following image for bracket directions.