User Guide
Table Of Contents
- Table of Contents
- 1 Product Introduction
- 2 Quick Start
- 3 Device Installation
- 4 Network Configuration
- 5 SenseCAP Portal
- 6 SenseCAP App Instructions
- 7 API Instruction
User Guide (Tech Document)
© 2008-2019 Seeed Technology Co., Ltd. All rights reserved. www.seeed.cc
28 / 50
Device Status Check, Dos & Don’ts
4.2.1 Checking Gateway Connection Status
After powering on the gateway, you can check gateway working status through the following methods:
⚫ Light Indicator: ON means the gateway is connected and in working condition, flashing means
network latency or no connection. When the connection resumes, the indicator will be ON.
⚫ App: In the SenseCAP App, “Online status” indicates “Online” when the gateway is connected to the
network and can receive and transfer sensor data. Please refer to Chapter 6 for obtaining the
SenseCAP App.
4.2.2 Sensor Node Working Status
You can refer to the LED indicator for the Sensor Node for its working status. Please see the status
explanations in the image below: