Datasheet

36.10.6 Interrupt Enable Set
Name: INTENSET
Offset: 0x16
Reset: 0x00
Property: PAC Write-Protection
This register allows the user to enable an interrupt without doing a read-modify-write operation. Changes
in this register will also be reflected in the Interrupt Enable Clear register (INTENCLR).
Bit 7 6 5 4 3 2 1 0
ERROR SB MB
Access
R/W R/W R/W
Reset 0 0 0
Bit 7 – ERROR Error Interrupt Enable
Writing '0' to this bit has no effect.
Writing '1' to this bit will set the Error Interrupt Enable bit, which enables the Error interrupt.
Value Description
0
Error interrupt is disabled.
1
Error interrupt is enabled.
Bit 1 – SB Slave on Bus Interrupt Enable
Writing '0' to this bit has no effect.
Writing '1' to this bit will set the Slave on Bus Interrupt Enable bit, which enables the Slave on Bus
interrupt.
Value Description
0
The Slave on Bus interrupt is disabled.
1
The Slave on Bus interrupt is enabled.
Bit 0 – MB Master on Bus Interrupt Enable
Writing '0' to this bit has no effect.
Writing '1' to this bit will set the Master on Bus Interrupt Enable bit, which enables the Master on Bus
interrupt.
Value Description
0
The Master on Bus interrupt is disabled.
1
The Master on Bus interrupt is enabled.
SAM D5x/E5x Family Data Sheet
SERCOM I2C – Inter-Integrated Circuit
© 2019 Microchip Technology Inc.
Datasheet
DS60001507E-page 1057