reComputer Jetson-10-1-A0 Introduction reComputer Jetson-10-1 series are compact edge computers built with NVIDIA advanced AI embedded systems: Jetson Nano and Seeed reference carrier board (Jetson-10-1-A). With rich extension modules, industrial peripherals, thermal management combined with decades of Seeed’s hardware expertise, reComputer Jetson is ready to help you accelerate and scale the next-gen AI product emerging diverse AI scenarios.
Category Introduction Part list 1 2 Jetson Nano (production version) A new dimension in AI Big compute performance Low power demands Module technical specifications 3 3 3 3 4 Seeed reference Carrier Board USB Ports Gigabit Ethernet HDMI M.
Module - Jetson Nano (production version) A new dimension in AI At just 70 x 45 mm, the Jetson Nano module is smaller than a credit card. But this production-ready System on Module (SOM) delivers big when it comes to deploying AI to devices at the edge across multiple industries—from smart cities and factories to agriculture and robotics. Big compute performance Jetson Nano delivers 472 GFLOPs for taking on modern AI algorithms.
Module Technical Specifications GPU NVIDIA Maxwell™ architecture with 128 NVIDIA CUDA® cores 0.5 TFLOPs (FP16) CPU Quad-core ARM® Cortex®-A57 MPCore processor Memory 4 GB 64-bit LPDDR4 1600MHz - 25.6 GB/s Storage 16 GB eMMC 5.
Seeed reference Carrier Board It has nearly the same functional design and same size as the carrier board of NVIDIA® Jetson Nano™ 2GB Developer Kit. Here is the difference between the two carrier boards as shown below. NVIDIA® Jetson Nano™ 2GB Developer Kit 100mm x 80mm x 29mm Jetson-10-1-A0 100mm x 80mm x 29mm The Seeed reference carrier board provides several connectors with industry standard pin outs to support additional functionality beyond what is integrated on the main platform board.
USB Port The carrier board supports Five Connectors. One is a USB 2.0 Type C connector for Power In, another one is a USB 2.0 Type C connector supports Device mode only (including USB Recovery). There are also one dual stacked USB 2.0 Type A connectors and one USB 3.0 Type A connectors which supports Host mode only. A single load switch supplies VBUS to all USB Type A ports and is limited to 2A of output current. USB 2.
USB 2.0 Type C data only - J2: Pin # Module Pin Name A4/B9 GPIO00 A9/B4 (USB_VBUS_EN0) A5 B5 A7 B7 A6 Module Pin # Net Name Usage/Description Type/Dir Default 87 USB0_VBUS_DET* VBUS Supply Power – – DAT_CC1 – – – – DAT_CC2 – – USB0_D_N 109 Type C_USB_DN USB 2.0 #0 Data Bidir USB0_D_P 111 Type C_USB_DP A8 – – – – – B8 – – – – – A1/B12 – – – A12/B1 – – – B6 Ground Ground Ground Note: In the Type/Dir column, Output I s to USB connector.
Dual stacked USB 2.0 - J5 : Pin # Module Pin Name1 Module Pin # Net Name Usage/Description Type/Dir2 VBUS Supply Power USB 2.0 #1 Data from hub Bidir Ground Ground VBUS Supply Power USB 2.0 #2 Data from hub Bidir Ground Ground USB 2.0 Type A 1 – – – 2 USB1_D_N 115 HUB_USB1_DM 3 USB1_D_P 117 HUB_USB1_DP 4 – – 1 – – – 2 USB1_D_N 115 HUB_USB2_DM 3 USB1_D_P 117 HUB_USB2_DP 4 – – Note: 1.
Gigabit Ethernet - J6 Pin # Module Pin Name Module Pin # Net Name Usage/Description Type/Dir 1 GBE_MDI0_P 186 GBE_MDI0_P Gigabit Ethernet MDI 0+ Bidir 2 GBE_MDI0_N 184 GBE_MDI0_N Gigabit Ethernet MDI 0– Bidir 3 GBE_MDI1_P 192 GBE_MDI1_P Gigabit Ethernet MDI 1+ Bidir 4 – – – MCT – 5 – – – MCT – 6 GBE_MDI1_N 190 GBE_MDI1_N Gigabit Ethernet MDI 1– Bidir 7 GBE_MDI2_P 198 GBE_MDI2_P Gigabit Ethernet MDI 2+ Bidir 8 GBE_MDI2_N 196 GBE_MDI2_N Gigabit Ethernet MDI
HDMI - J3 HDMI Connector Pin Description Pin # Module Pin Name Module Pin # Net Name Usage/Description Type/Dir 1 DP1_TXD0_P 65 HDMI_TXD2_ P HDMI Transmit Data 2+ Output 2 – – Ground Ground 3 DP1_TXD0_N 63 HDMI_TXD2_ N HDMI Transmit Data 2– Output 4 DP1_TXD1_P 71 HDMI_TXD1_ P HDMI Transmit Data 1+ Output 5 – – Ground Ground 6 DP1_TXD1_N 69 HDMI_TXD1_ N HDMI Transmit Data 1– Output 7 DP1_TXD2_P 77 HDMI_TXD0_ P HDMI Transmit Data 0+ Output 8 – – Ground Ground
M.2 Key E Pin # Module Pin Name Usage/Description Type/Dir 1 – Ground Ground 3 USB2_D_P 5 USB2_D_N USB 2.0 Data Bidir 7 – Ground Ground Module Pin Name Usage/Description Type/Dir – – – – Main 3.
Camera Connector CSI - J9 Pin # Module Pin Name Usage/Description Type/Dir Pin # Module Pin Name 1 – Ground Ground 16 – 2 CSI0_D0_N – CSI0_D0_P Input 17 3 CSI 0 Data 0 18 – 4 – Ground Ground 19 – 5 CSI0_D1_N – CSI0_D1_P Input 20 6 CSI 0 Data 1 21 – 7 – Ground Ground 22 – 8 CSI0_CLK_N – CSI0_CLK_P Input 23 9 CSI 0 Clock 24 – 10 – Ground Ground 25 – 11 CAM0_PWDN Camera #0 Power-down Output 26 – 12 CAM0_MCLK Camera #0 Master Clock Output 27
40-Pin Expansion Header - J10 40-Pin part 1 Header Pin # Module Pin Name Module Pin # Tegra Pin name Default Usage / Description Alternate Functionality 1 – – – Main 3.3V Supply – 2 – – – Main 5.0V Supply – 3 I2C1_SDA 191 GEN2_I2C_SDA I2C #1 Data GPIO 4 – – – Main 5.
40-Pin part 2 Header Pin # Type/ Direction Pin Drive or Power Pin Max Current Tegra GPIO Port # Power- on Default PU/PD on Module Notes 1 Power (input) 1A – – – 1 2 Power (input/output_ 1A – – – 1 3 Bidir/OD 1mA / -1mA PJ.03 z 2.2KΩ PU 2 4 Power 1A – – – – 5 Bidir/OD 1mA / -1mA PJ.02 z 2.2KΩ PU 2 6 Ground – – – – – 7 Bidir/Output 20uA / -20uA PBB.00 pd 3 8 Bidir/Output 20uA / -20uA PG.00 pd 3 9 Ground – – – 10 Bidir/Input 20uA / -20uA PG.
Note: 1. This is current capability per power pin. 2. These pins are connected to NVIDIA® Tegra® directly. They are open-drain (either pulled up or driven low by Tegra when configured as outputs). The max drive that meets the data sheet VOL is 1 mA. 3. These pins connect to TI TXB0108 level translators. Due to the design of these devices, the output drivers are very weak, so they can be overdriven by another connected device output for bidirectional support. 4.
Button Header - J14 Pin # Module Pin Name Module Pin # Signal Name Usage/Description Type/Dir Default 1 - - PC_LED- Connects to LED Cathode to indicate System Sleep/Wake (Off when system in sleep mode) Input 2 - - PC_LED+ Connects to LED Anode (see Pin 1) Output 3 UART2_RXD (DEBUG) UART2_RXD_LS UART #2 Receive Input 4 UART1_TXD (DEBUG) UART2_TXD_LS UART #2 Transmit Output 5 – BMCU_ACOK Connect Pin 5 and Pin 6 to disable Auto-Power-On and require power automation press.
Fan Connector - J8 Pin # Module Pin Name Module Pin # Net Name Usage/Description Type/Dir Default 1 – – – Ground Ground 2 – – – Main 5.0V Supply Power 3 GPIO08 (SDMMC_CD) 208 FAN_TACH Fan Tachometer signal Input 4 GPIO14 (PWM) FAN_PWM Fan Pulse Width Modulation signal Output 230 Note: In the Type/Dir column, Output is to camera module. Input is from camera module. Bidir is for bidirectional signals.
Passive aluminum heatsink Original NVIDIA Jetson Nano Passive Heat Sink Designed to fit the NVIDIA Jetson Nano modules Dimensions: 58.7mm x 39.4mm x 17.3mm Aluminium Heatsink Overall dimension: 130mm x120mm x 50mm More information Please check our Wiki and ask question at our Forum or Discord community.