Owner's Manual
11 |
• Factors that may inuence performance are:
• Shielding from metal in the attic laying between the wireless receiver and
the wireless smart controller.
• Reections from metal around the wireless receiver.
• Interference from nearby transmitters (e.g. mobile phone, AM radio,
Television, RF security systems)
Please refer to the installation manual of the heating or cooling appliances
for connecting the 6 pin communication plug from the wireless receiver.
Some manuals may refer to a ‘wired’ wall control conguration. However, the
wireless receiver can be connected in place of the wall control connection
shown in the schematic diagrams.
Fit the 4x AA batteries supplied with the Wireless Smart controller.
ILL2856-A
CONNECTING THE WIRELESS RECEIVER
COMMISSIONING
Step 1
PAIRING
Step 2
Cycle the power to the installation.
NOTE:
Rechargeable
batteries should not
be used.
Only good quality
Alkaline or Lithium
AA batteries to be
used.