Owner's Manual

MagIQtouch Controller INSTALLATION MANUAL | 24
SUPPORT
Symptom Cause Action
The screen on the
Wireless Smart
Controller goes
blank after a while
The Smart controller
conserves the battery
life by putting the
controller in a sleep
mode
Press Home Button
The screen on
the wireless
Smart controller
goes blank but
the system still
operates
The Smart controller
conserves the battery
life by putting the
controller in a sleep
mode
To check the status of the system press
the ‘HOME’ button to the right of the
Wireless smart controller to see the
current running condition of the system
The additional
Wireless Smart
Controller does
not allow me to
adjust anything
The additional Wireless
controller will display
the operating condition
of system
Press ‘ACTIVATE’ on wireless Smart
Controller
Not achieving set
temperature
The temperature
is sensed at the
controller.
Check the location of
the controller.
• Avoid direct sunlight exposure
• Avoid sitting wall control near
heat sources such as stoves
and televisions.
• Do not locate in direct airow of
the duct outlets.
• Do not locate in strong drafts
or in dead spots such as
cupboards or drawers.