OWNER’S MANUAL Portable Refrigerated Air Conditioner Climate Master CM12W, CM12WX, CP12HS, CM15WX, CM15HW, CP15W, CP15HS ®
CONTENTS Introduction ......................................1 Safety ..............................................2 Component location.........................3 Installing the exhaust hose ..............4 Control panel ...................................5 Remote control ................................6 Operation......................................7-8 Maintenance ....................................9 Troubleshooting .............................10 Specifications.................................
INTRODUCTION THANK YOU for choosing a Convair Air Conditioner. This appliance has been carefully engineered to bring you trouble-free personal air conditioning. Please read this manual carefully so that you take full advantage of the many benefits your Convair provides. Energy Saving Tips D Do not locate the air conditioner where furniture or other objects can obstruct the air flow. D Keep curtains and blinds closed during the hottest part of the day. D Keep the filters clean.
SAFETY Electrical Safety (cont) General Safety For indoor use only. Transport the air conditioner in an upright position only, or leave it in an upright position for at least 2 hours before use (Fig 1). Use only in the upright position on a flat level surface and at least 50cm from any objects. Do not place objects on the air conditioner, or through the ventilating slots or restrict the air inlets & outlets (Fig 2). Closely supervise any children and pets when the air conditioner is in use.
COMPONENT LOCATION 3 Air Outlet Control Panel Display Panel Remote Sensor Handle Air Intake (side panel) Air Intake (side panel) Remote Control 4 Rating Label Active Carbon Filter Cord Storage Door Air Intake (active carbon filter to be fitted here) Air Filter Exhaust Air Outlet Power Cord Exhaust Hose Drain Exhaust Fitting (window end) Window Attachment SEELEY INTERNATIONAL – OWNER’S MANUAL 3
INSTALLING THE EXHAUST Assembling the exhaust hose (Fig 5,6) Step 1: Fit the exhaust hose to the rear panel outlet by rotating the hose in a clockwise direction. Fit the window adaptor onto the hose by rotating the adaptor in a clockwise direction. Step 2: Screw the round window adaptor into position on the window attachment with the screws (4) provided. Step 3: Open the window and fit the adjustable window attachment. Extend the attachment as required and lock into place with the screw (1) provided.
CONTROL PANEL 7 Ion / TiO2 button Timer Set button Temperature adjust buttons Mode Select button Power ON / OFF button Press to activate ion generator and TiO2 lamp (only models CM12WX and CM15WX) Press to enter the timer setting mode and time Press r to increase, s to decrease the set temperature Press to cycle from Cooling, Dehumidifying, Fan and Heating (CP12HS,CP15HS and CM15HW only) modes.
REMOTE CONTROL Signal transmission point 9 Fan speed adjust buttons 10 Mode buttons (Cool-DehumidifyFan-Heat) Temperature adjust buttons Sleep mode button Timer on / adjust button Ion / TiO2 button (only active for models CM12WX and CM15WX) Power ON / OFF button Battery compartment Battery cover Preparation before operation Remove the battery cover and insert new batteries (AAA), making sure the + and - are matching the compartment markings (Fig 10).
OPERATION Starting the air conditioner Step 1: Ensure the cooler is plugged in and switched on. Step 2: Press the ON/OFF button on the remote control or ON/OFF button on the control panel to start the air conditioner.
OPERATION cont. Air Conditioner Features Step 6: Your air conditioner has a SLEEP mode, activated by pressing the button on the control panel or remote control. SLEEP mode will change the fan speed to low and increase (for cooling mode) or decrease (for heating mode) the set temperature by 1°C each hour for 2 hours. No further change will occur after the 2nd hour.
MAINTENANCE Always disconnect the air conditioner from the electricity mains before cleaning or draining. To maximize the efficiency of the air conditioner, clean regularly. Cleaning the housing Use a soft, damp cloth to wipe the body clean. Never use aggressive chemicals, spirits, detergents, chemically treated cloths, or other cleansing solutions. These substances could possibly damage the cabinet. Cleaning the filters Remove the filters as shown (Fig 13A).
TROUBLESHOOTING Problem Check The air conditioner does not run. Is the air conditioner plugged in ? Is there a power failure? Is the "WATER FULL" error code Drain the tank as shown (Fig 13). flashing? Is the room temperature below the set temperature? The air conditioner has little effect (firstly ensure that the room being cooled is not too large for the stated capacity of the air conditioner). Is there direct sunshine? Remember to close curtains or blinds.
SPECIFICATIONS SEELEY INTERNATIONAL - CLIMATEMASTER PORTABLE AIR CONDITIONER CM12W, CM12WX CP12HS CM15WX, CP15W CM15HW, CP15HS Model(s) Function Personal Cooling Personal Cooling & Heating Personal Cooling Personal Cooling & Heating Cooling Capacity (Watts) † 3,500 (12,000 Btu/hr) 3,500 (12,000 Btu/hr) 4,400 (15,000 Btu/hr) 4,400 (15,000 Btu/hr) Heating Capacity (Watts) † - 3,500 (12,000 Btu/hr) - 4,400 (15,000 Btu/hr) Dehumidifying Capacity (L/hr) 1.2 1.2 1.4 1.
WARRANTY In this warranty: We or us means Seeley International Pty Ltd ABN 23 054 687 035, and our contact details are set out at the end of this warranty; You means you, the original end-user purchaser of the Goods; Supplier means the authorised distributor or retailer of the Goods that sold you the Goods in Australia; and Goods means the product, unit, appliance or equipment which was accompanied by this warranty and purchased in Australia.
WARRANTY cont. 6. If it is less than fifteen (15) days from the date of purchase of the Goods, in order to claim under the warranty granted under clause 1 You must return the Goods to the Supplier at the place of purchase together with the proof of purchase. 7. If it is more than fifteen (15) days after the date of purchase, in order to claim under the warranty granted under clause 1 You must: (a) either: (i) contact us within the Warranty Period on: 1300 650 644; or (ii) log a claim on our website www.
It is the policy of Seeley International to introduce continual product improvement. Accordingly, specifications are subject to change without notice. Please consult with your dealer to confirm the specifications of the model selected. Warranty Service Australia 1-300-650-644 seeleyinternational.com ® 00238501-D convair.net.