Operation Manual

5. Search

In case the desired channel cannot be preset with the Auto Program function, or you would like to

set the desired channels to specific channel numbers, please use the Search function.

After selecting "Frequency" in the TUNE menu, press the

buttons. The TV searches

another lower/upper channel. To stop search, press the MENU button. You can also select the c-

hannel frequency directly by using the Num buttons.

If the selected channel is not the one you want, press the buttons again until the desired channel is sel-

ected. If the TV does not stop searching when finding a channel, please use the Fine Tune function.

6. Frequency Fine-tuning

After selecting "Fine Tune" in the TUNE menu, press the buttons until you get the best sound

and picture effect. Press the DISP button to check up the fine-tuned channel, and you will find that the

position number turns to yellow.

7. Auto Search

Before performing Auto Search, please affirm that the Sound System is correct. After selecting "Auto S-

earch" in the TUNE menu, press the

button. The TV will search automatically in sequence. After auto

searching, the TV will store receivable channels and returns to POS1.

Unused position number is automatically set to Skip On. During Auto Search, press the MENU button

to stop searching.

8. Swap

Use the SWAP function to resort program position. For example, you want to change Channel 9 to Ch-

annel 7.

a. Press the TUNE menu button to select the SWAP menu in the TV mode.

b. Press the

buttons to highlight "Channel A". Press the Numeric buttons to set it to 9. Then set chan-

nel B to 7 in the way mentioned above.

c. Select the SWAP menu, and press the

button. The current channel No. is changed to Channel 7 and

the content of Channel 7 is exchanged with that of Channel 9.

The current channel No. is Channel 7.

Repeat the operations mentioned above to sort other searched channel position as desired.

VHF H-VHF H- Channel 11

67 75MHz

.67 75MHz.

DOWN:DOWN

：UP：UP

Auto Search

VHF H-VHF H- Channel 11

67 75MHz

.67 75MHz.

MENU Stop:MENU Stop:

Channel AChannel A 9

Swap

SELECT ADJUST

Channel BChannel B

Menus Operation