Operation Manual

Picture Menu
1. Picture Mode Selection
Before shipment, the TV was given three preset
picture modes: Soft, Nature and Rich. Press the
P. MODE button to select one of the
three preset
modes or the User mode.
Refer to the following table about each picture
mode.
Mode Picture Quality
Soft
The contrast is low, suitable for watching TV in mild surrounding light.
Nature
Standard status, suitable for watching ordinary programs.
Rich The contrast is high, suitable for watching TV in bright environment.
User Picture quality user sets
not available for NTSC DVD discs.
“Skin Tone” is the dynamic skin tone control. You may set on or off.
2. To adjust picture quality
To perform the following operation, press the MENU button or the picture menu button directly to
select the PICTURE menu. Press the
buttons to choose and Press the buttons to adjust
the digital level of the selected adjustment as desired.
The adjusted picture level is automatically stored in the User position.
Sound Menu
On the Sound Menu mode ,press the
buttons to choose the parts you want to change，then
press the buttons to change.
NOTE: If there is no BASS、TREBLE or LOUDNESS selection on the menu, it means this TV does
not support those functions.
Note: There is no Tint function under PAL or SECAM system for some chassis.
The adjustable “Tint” range is –31-+31, 0” is the normal value. Under DVD mode, "Tint" function is
“
“
”
Contrast 32
Brightness
PICTURE
SELECT ADJUST
Color
32
32
Sharpness
Tint
Skin
ToneSkin Tone
32
0
Off
Vo lu m e 32
Treble
SOUND
SELECT ADJUST
Bass
32
32
Loudness
On
(Some chassis do not have this function.)
7
Menus Operation