User manual

Power-Cord Protection - Route the power cord
so that it is not likely to be walked on or pinched
by items placed upon or against them, paying
particular attention to the plugs, receptacles, and
the point where the cord exits from the appliance.
Lightning - For added protection for this appliance
during a lightning storm, or when it is left
unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the
antenna or cable system. This will prevent damage
to the appliance due to lightning and powerline
surges.
Cleaning - Unplug the appliance from the wall
outlet before cleaning or polishing it. Do not
use
liquid cleaners or aerosol cleaners. Use a cloth
lightly dampened with water for cleaning the
exterior of the appliance.
Clean the appliance only
as recommended.
Object and Liquid Entry - Never push objects
of any kind into the appliance through openings
as they may touch dangerous voltage points or
short out parts that could result in a
fire or
electric shock. Never spill liquid of any kind
on
the appliance.
SERVICE
Damage Requiring Service- Unplug the
appliance from the wall outlet and refer
servicing to qualified service personnel under
the following conditions:
- When the power cord or plug is damaged or
frayed.
- The appliance does not appear to operate
normally or exhibits a marked change in
performance. - This indicates
a need for service.
Servicing - Do not attempt to service the
appliance yourself as opening
or removing covers
may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service
personnel.
- If liquid has been spilled or objects have fallen
into the appliance.
- If the appliance does not operate normally
when following the operating instructions, adjust
only those controls that are specified in the
operating instructions. Improper adjustment
of
other controls may result in damage and will
often require extensive work by a qualified
technician to restore the appliance to normal
operation.
- If the appliance has been exposed to rain or
water.
- If the appliance has been subject to excessive
shock by being dropped, or the cabinet has been
damaged.
Replacement parts- When replacement parts are
required, be sure the service technician has used
replacement parts specified that have
the
same characteristics as the original parts.
Unauthorized substitutions may result
in fire,
electric shock,or other
hazards.
Safety Check - Upon completion of any service
or repairs to the appliance, ask the service
technician to perform routine safety checks)as
specified ) to determine that
the appliance
is in safe operating condition.
1. Do not install this equipment in a confined or building-in space such as a book case or similar unit, and
remain a well ventilation conditions. The ventilation should not be impeded by covering the ventilation
openings with items such as newspaper, table-cloths, curtains etc. Minimum 10 cm distance around the
apparatus for sufficient ventilation.
2. WARNING：To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
The apparatus shall not be exposed to dripping or splashing and that objects filled with liquids, such as
vases, shall not be placed on apparatus.
3. WARNING: The batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
4. WARNING: The mains plug is used as disconnect device, the disconnect device shall remain readily
operable.
This appliance is classified as a CLASS 1 LASER product. The CLASS 1 LASER PRODUCT
MARKING is located on the rear exterior.
The use of optical instruments with this product will increase eye hazard. As the laser beam
used in this DVD player is harmful to eyes, do not attempt to disassemble the cabinet.
!
CLASS 1 LASER PRODUCT
KIASSE 1LASER PRODUKT
CLASSE 1APPAREIL LASER
CLASE 1 PRODUCTO LASER
CLASS 1
LASER PRODUCT
!
Warning
Caution