Operating instructions

12
OPERATION
MUTE
ZOOM
Note:
A-B REPEAT
REPEAT
Note:
ANGLE
AUDIO
" : SELECT : PLAY "
Press MUTE button during play, the player shows and there is no audio output (silence), press
again to cancel MUTE.
Press VOL+/VOL- button play may change volume for audio output.
For VCD when playing 2.0 PBC is operating. Press RETURN key, it will return to menu mode.
When playing DVD/MP3/JPG discs. Press RETURN key, it will return to menu mode.
Press OSD button during play to show the disc s relevant information on TV screen(such as playing time,
chapter number, playback status).
Zoom function can only be operated in JPEG disc and VCD/DVD format disc. By pressing zoom button
when playing DVD/VCD discs, there are 3 levels of zoom available (ZOOMx2, ZOOMx4, ZOOMx1).
When playing JPEG disc, there 5 levels of zoom available(150%, 200%, 25%, 50%, 100%)
Zoom function is not working on PAL system DVDs. MP3 does not have this function
Press A-B button during playback at the point where repeat play is to commence (a) then press again at
the point where repeat play is to be concluded (B). Repeat playback between point (A) and point (b)
starts. Press A-B button once more where TV screen appears REP OFF to return to normal play.
Press the repeat key to choose repeat play chapter or title (DVD) and play single audio or full disc (VCD,
CD, MP3).
Some VCD do not have repeat function with PBC ON state.
Press ANGLE continuously during playback DVD disc to toggle the disc between available angles
recorded on the disc if the disc has multi-angle function.
Press AUDIO button during playback to toggle between available audio language recorded on the disc if
the disc has this multi-language.
Note: Press AUDIO button could toggle available audio language soundtracks.
Press PROG button, the program playback screen appears on the TV monitor, 20 tracks or chapters can
be programmed. Use button on the remote control to select your preferred track (CD/VC D) or
title and chapter (DVD), then press ENTER button to confirm.
Use CLEAR button to amend false or unsatisfied settings. You can only press the PLAY button on the
remote control to start playing after you finish the program setting. Press the PROG button directly to
return to normal play mode. In this case, the program is not confirmed.
shown on screen is only used for indication, no function for cursor.
When playing VCD 2.0 press PBC button to display title menu use number key choice and ENTER button
to play music.
VOL+/VOL-
RETURN
OSD
PROGRAM
PBC function (only VCD)