Operation Manual

18
20
22
24
14
15
19
21
23
Setup Menu
LANGUAGE SETUP
Setup language for OSD/Menu/Audio/Subtitle.
Default setting is German
Item Instruction Default setting
Item Instruction Default setting
Setup the OSD language
Setup the audio language
Setup the subtitle language
When OFF is selected, the subtitle will not
be displayed.
Setup the menu language
OSD Lang
Audio Lang German
German
German
German
Subtitle Lang
Menu Lang
VIDEO SETUP
Adjust the brightness/ contrast/ hue /saturation / Sharpness effect.
Contrast Adjust the color contrast. 0 ~12. 6
Hue Adjust the display color. -6 ~ +6. 0
Saturation Adjust the color saturation. 0 ~ 12. 0
6
Brightness
Adjust the LCD brightness effect . 0 ~12.
Sharpness
Setup the image sharpness
0
Item Instruction Default setting
DIGITAL SETUP
STEREODual Mono Setup the mono effect.
(STEREO, MONO L/R, MIX MONO)
Basic Operation
Attach the Antenna
1. Attach the supplied antenna to the antenna connector located on the player’s rear panel.
2. Place the attenna on a stable plane.
You can relocate the antenna from time to time for a best possible receiption when the signal performs weak.
Connect the Power Source
1. Connect one end of the supplied AC adaptor to the wall outlet with 100~240 V and the other end to the unit’s
power jack on the unit’s rear panel.
2. Slide the power switch to ON
Access the DVB Mode
Press the MODE button on the unit/remote to enter the DVB mode.
Initial Channel Scan - Auto Scan
The auto scan function is used to automatically scan for available broadcast channels, and should be used when
powering on the player for the first time. If initial again at a later time, this process will erase all of the
previously saved channels.
Use the Scan button on the remote to start Auto Scan. You also can perform Auto Scan under the system menu,
press the Setup button to display the system menu.
Channel Access
Press the up/down direction button on the remote/unit to skip channels. Or press the numeric buttons to access
the channel directly.
Adjust the Volume
Use the volume control to adjust the sound output to a proper listening level.
DVB System Menu
Various features of the DVB can be preset in the DVB menu. Press the Setup button to display the DVB menu.
While working with the DVB menu, usually use the direction buttons and the OK button to select and to confirm
an option. For more details, please see the DVB Menu section.
DVB Function