User manual

TV System
Use this menu to setup Display Mode,Aspect Ratio.Dolby Digital,
Video Output and LCN Mode.
Enter "System Setup" menu, highlight "TV System".
Press ,the sub-menu appears.
Press to select the desired
item and press to setup the
desired selection.
Press to confirm.
1
2
3
TV System
Select Change Exit MENU
Display Mode
Aspect Ratio
Dolby Digital
Video Output
LCN Mode
Auto
4:3PS
Off
CVBS
Off
Display Mode:
4
TV System menu is to set up the broadcast system.
Aspect Ratio: Aspect Mode is used for switching the screen aspect ratio mode.
Auto
PAL
NTSC
Auto switch to TV System
PAL TV System
NTSC TV System
Auto
4:3PS
4:3LB
16:9
Auto switch to Aspect Ratio
4:3 Pan Scan
4:3 Letter Box
16:9 Wide Screen
Dolby Digital: Dolby Digital to set AC3 on or off.
Video Output: Video Output is use for switching the video output mode.
RGB
CVBS
Set to output RGB video signal
Set to output CVBS video signal
LCN Mode: If LCN (Logical Channel Number)Select function is activated,You can't change the
original number of TV channels by scanning .
On
Off
Activate "LCN Select" function if there is LCN for the TV station of the country.
Deactivate "LCN Select" function.
14
SYSTEM SET-UP