Operation Manual

UK-10
14.VOLUME “+” BUTTON
15.RANDOM BUTTON
16.PRESET/FOLDER UP BUTTON
17.PRESET/FOLDER DOWN BUTTON
18.SKIP/TUNE SEARCH UP BUTTON
19.PLAY/PAUSE BUTTON
20.STOP BUTTON
Remote control
 Remove the plastic tab from the battery compartment at the rear of the remote
control. Pull it gently
 Replace a used battery.
 Open the battery compartment and insert one battery
of the type CR 2032 (Fig.1).
 Pay attention to the positive (+) is facing up and the
battery must be placed under the tab.
 Close the battery compartment. Make sure that the cover is
locked in place.
BATTERY REPLACEMENT
When the battery become too weak, the operating distance of the remote controller is
greatly reduced and you will need to replace the battery
Notes: To maintain the accuracy and long life of the transmitter, do not press two or
more buttons simultaneously
If the remote control is not to be used for a long time, remove the batteries to prevent
possible damage through leaking batteries.
USING THE REMOTE CONTROLLER CORRECTLY
Point the remote controller at the remote sensor (15)
The functions of the button on the remote control are the same as the corresponding
controls on the main unit.
When there is a strong ambient light source, the performance of the infrared remote
sensor may be degraded, causing unreliable operation.
The maximum effective distance of remote control operation is about 5 metres (16.5
feet).