Operation Manual

UK-13
RADIO OPERATION
Operation
1. Select ON with the Main Power Switch (23) on the rear of the unit.
2. Press the STANDBY/ON Button on the unit (18) or the remote control (1) to turn
the unit on.
3. Select the TUNER function with the FUNCTION Button on the unit (6) or on the
remote control (5).
4. There are a number of ways that you can tune to radio stations.
5. Follow the instructions in the sections below.
6. Adjust the VOLUME to the desired level using the VOLUME-/+Button(9,10) or
the VOLUME-/+Buttons(13,14)on the remote control.
7. To turn off the radio, press the STANDBY Button again
Manual Tuning
Manual Tuning Manual tuning is useful when you already know the frequency of the
desired transmitter. Select the desired frequency band using the Band button.
To change the frequency, repeatedly press the TUNING up or down buttons until the
precise frequency is reached.
Automatic Tuning
Press and hold the TUNING up or down Buttons for about a second.
The radio will start automatically scanning for strong radio signals. The TUNER
Display shows the frequency in MHz for FM,
The tuner will stop scanning when it finds a strong signal.
Repeat this process until the desired station is found.
Notes: As automatic tuning depends on the signal strength of the transmitters, weak
transmitters are sometimes skipped. In such a case, tuner manually to find the weaker
transmitters. On the other hand, with a very strong signal, the tuner may stop before it
reaches the optimum setting. Tune manually for the best reception.
Storing Stations
This unit allows you to store the frequencies of up to 30 radio stations (30xFM)in the
memory; First tune into the station you want to store using one of the methods above.
Then press the MEM/C-ADJ. button(7) on the unit or on the remote control(6).
Press PRESET/FOLDER-UP or PRESET/FOLDER-DN Buttons on the unit (5,11) or
on the remote control (16,17) to select the desired channel memory and press the
MEM/C-ADJ. button within 5 seconds to store it.
To reprogram a preset station repeat the procedure above.