Operation Manual

UK-15
dirt and dust from entering the mechanism.
Never place more than one disc into the disc compartment at any time.
If the disc is correctly loaded, the following information will be displayed:
Total number of tracks on the disc Total playing time
Notes: After the disc compartment is fully closed, the disc information may not
appear on the display. This means that the disc is improperly loaded (most likely it is
upside down).To check, open the disc compartment again and reload the disc.
DISC PLAY
Press the CD door button (4) to open the disc compartment, and insert a CD.
Close the disc compartment by pressing the CD Cover.
Press the PLAY/PAUSE button (14) on the unit or (19) on the remote control. Disc
play will begin from the start of the first track of the disc.
Notes: If the disc is deeply scratched, or too dirty, disc play may not start. If an
improperly centred disc is played, noise can be heard in the mechanism. The use of
such discs should be avoided.
Disc Errors
This compact disc player has built-in error compensation circuits to correct for minor
defects in a disc.
There are limits, however, to the amount of corrections possible.
In some cases, the CD player may skip some tracks, or parts of tracks, on a disc
during disc play. This problem may be caused by defects (such as scratches) in the
disc being played, which are too large for the error compensation circuits to handle. If
you encounter this problem, check the CD player's operation as follows, before
having the unit serviced:
Play a new disc. If the CD player operates normally, the skipping problem is probably
due to a defective disc.
A) In the CD mode
1. This unit can play CD,CD-R,CD-RW and MP3 discs.
2. If no disc or can't read TOC, NO DISC will be displayed (F4)
Playing the entire CD/MP3
1. Insert the CD disc into the CD compartment, the main unit will automatically