Operation Manual

UK-21
4. Repeat the above steps to program other tracks a maximum number of 32 tracks in
CD mode or 64 tracks in MP3/WMA/USB/SD CARD be programmed.
MP3/WMA/USB/SD CARD
1. Press the MEM/C-ADJ. button to shift to PROGRAM mode. The album number is
flashing. (F20)
2. Press the PRESET/FOLDER(UP or DOWN) button, the album number will be
changed.
3. Press the MEMORY/CLOCK-ADJ button, the track number is flashing. (F21)
4. Press the SKIP/TUNER SEARCH (UP or DOWN), the track number will be
changed.
5. Press the MEMORY/CLOCK-ADJ button to confirm the track number.
1. PROGRAM PLAY
Press the PLAY/PAUSE button on the unit (or remote control), it will play starting
with the first track of the program. When all tracks have been played, the unit display
will show the number of tracks and the playing time of the CD/MP3/WMA tracks.
2. CANCEL PROGRAM
1. Press the STOP button once, or open the CD tray door and close it again then the
memory will be erased.
2. Set a new program, the existing one will be cleared.
Note: During the program mode.
1. Press the "REPEAT" button once, the "REPEAT" indicator will light on the display.
Then the main unit will repeat the current track.
2. Press the "REPEAT" button twice, the "REPEAT ALL" will light on the display.
Then the main unit will repeat all the total number of tracks.
3. Press the "REPEAT" button once more again. The main unit will return to play the
program in normally.
AUX IN PLAY
The AUX input is located at the rear of the unit (2). Use a 3.5 mm stereo jack cable to
connect audio equipment through the LINE IN jack.