Operation Manual

UK-14
This compact disc player has built-in error compensation circuits to correct for minor
defects in a disc.
There are limits, however, to the amount of corrections possible.
In some cases, the CD player may skip some tracks, or parts of tracks, on a disc
during disc play. This problem may be caused by defects (such as scratches) in the
disc being played, which are too large for the error compensation circuits to handle. If
you encounter this problem, check the CD player's operation as follows, before
having the unit serviced:
Play a new disc. If the CD player operates normally, the skipping problem is probably
due to a defective disc.
A) In the CD mode
1. This unit can play CD,CD-R,CD-RW and MP3 discs.
2. If no disc or can't read TOC, NO DISC will be displayed (F4)
Playing the entire CD/MP3
1. Insert the CD disc into the CD compartment, the main unit will automatically
read the total number of the folders and tracks at the same time.
2. Press the PLAY/PAUSE button, the unit will play the first track of the CD disc
automatically.(F5)
3. Press the PLAY/PAUSE button once again, the time elapsed indicator will
flash.(F6)
4. Press SKIP/TUNERSEARCH(UPorDOWN) button once to change Track NO.,
press and hold the SKIP/TUNERSEARCH(UP or DOWN) button once to skip
fast forward or backward of each song.
5. To resume playback, press the PLAY/PAUSE button once more again.
6. To stop playback, press the STOP button once on the unit (or remote control).
B) MP3/WMA
1.Insert the MP3/WMA disc into the CD compartment, the main unit will
automatically read the total number of the folders and tracks at the same time.
2. Press the PLAY/PAUSE button, the unit wiII play the first track of the CD disc
automatically.(F7)