Operation Manual

UK-15
3. Press the PLAY/PAUSE button once again, the time elapsed indicator will
flash.(F8)
4. To change Track NO., Press SKIP/TUNE SEARCH(UP or DOWN) button once.
Press and hold the SKIP/TUNE SEARCH(UP or DOWN)button once to skip fast
forward or backward each song.
5. To resume playback, press the PLAY/PAUSE button once more again.
6. To change the ALBUM NO., press the PRESET/FOLDER UP or
PRESET/FOLDER DN once.
7. To stop playback, press the STOP button once on the unit (or remote control)
Note: If the main unit is not working properly, disconnect the power source and then
reconnect it again
ID3 Operation
1. Press the ID3 button once to open the ID3 function.
2. If the mp3 file is write in “ID3” it will automatically to search the information of
“TITLE NAME” “ARTIST NAME” and “ALBUM NAME” to show in the display.
3. Press the ID3 button on the remote again. Then resume to normally play.
USB/SD CARD OPERATION
During in the STANDBY mode
1. Insert the USB DEVICE or SD/MMC CARD, and then press the STANDBY button
on the main unit (or remote control) to power “ON" the unit.
2. Press the FUNCTION button on the main unit (or remote control) to select the USB
or SD/MMC mode. The main unit will automatically read the total number of the
folders and tracks at the same time.(F9)
3. If the USB memory device more than one folder.
a. Press the PRESET/FOLDER(UP or DOWN) button to select each folder.
b. Press the SKIP/TUNER SEARCH(UP or DOWN) button to select current track in
desired folder.
4. If the MP3 and WMA are written in "ID3".