User Guide

SECURING IN PLACE (ADJUSTER ADJUSTMENT)

Be sure to have all the Adjusters make contact with a flat surface.

Unless the Adjusters come into contact with a flat surface, the Cabi-

net can move of itself, causing an accident.

This machine has 4 casters and 4 adjusters (shown below). When the installation position is determined, make sure

that the machine position is level, bring the adjusters into direct contact with the floor, and make adjustments so that

the casters will be raised approximately 5mm. from the floor.

Move the machine to the installation

position. Be sure to provide adequate

space allowing the player to get on

and off.

Have all of the leg adjusters make

contact with the floor. Adjust the

height of the leg adjusters by using a

wrench so that the machine’s position

is kept level.

After making adjustments, fasten the

leg adjuster nut upward and secure

the height of the leg adjuster.