Instruction manual

16
TO SET 12HR OR 24 HR TIME FORMAT
1. Then press SET again, the clock display shows 24Hr and flashes.
2. Press + or - to select 12Hr or 24Hr. When 12Hr time format is selected, the PM icon will appear
on the clock display to indicate the afternoon time.
Strong DCF signal
Medium DCF signal
Weak DCF signal
If weak or no signal is detected, you will need to place the clock to another area for better reception, or
unplug the AC/DC jack and plug again to start over reception again. When the clock radio succeeds to
catch the DCF time signal, the
icon becomes static; if it fails the icon will disappear.
Automatic Reception and Manual Reception
Automatic reception: this clock starts reception automatically everyday at 1:00am, 2:00am and 3:00am.
If auto reception fails, the clock radio will start automatic reception every 3 hours until it receives the
DCF radio controlled time signal.
Manual reception: press “+/ wave” button once anytime to start manual reception of DCF time signal.
LCD VIEWING ANGLE
This clock radio is designed for bedside use.
The effective viewing angle of the LCD display is described in the attached drawing.
TO SET TIME
1. Press SET to enter time set mode, the time digits flash.
2. Press + or - on the back of your clock radio to set your desired time. Press and hold + or - will
accelerate setting in faster speed.
TO SET TIME ZONE
Then press SET again, time digits change to “00”and flash. Press +/- button to select time zone:
“00” = GMT +1 hour (e.g. Germany)
“01” = GMT +2 hours (e.g. Finland)
“-01” = GMT 00 hour (e.g. U.K.)