Instruction manual

TO SET THE SNOOZE DURATION
1. Press SET again, the clock display shows Zz and 05 flashes.
2. Press + or - to set your desired snooze duration from 5 to 60 minutes.
3. Press SET again (or if no key is pressed within 5 seconds) to return to normal clock display
mode.
TO SET THE ALARMS
1. To set Alarm 1, press ALM 1 button once, the clock display shows 1 and 6:00 flashes.
2. Press + or - to set your desired alarm time. Press and hold + or - will accelerate setting in faster
speed.
3. Press ALM 1 again to select Wake-by-Buzzer (
icon appears) or Wake-By-Radio ( icon
appears)
4. To set Alarm 2, just repeat Step 1 - 3 above but use ALM 2 button.
TO TURN ON OR OFF ALARM 1 AND/OR ALARM 2
1. Press ALM 1 or ALM 2 button once to review the currently set alarm time(s).
2. Press the button again to turn on or turn off the alarm. When the alarm is turned on, the related
alarm icon appears. When no alarm icon is showing, the related alarm icon is off and the alarm
function is turned off.
TO STOP AND RESET THE ALARM TO COME ON THE NEXT DAY
When Alarm 1 sounds, press the ALM 1 button to stop the alarm sound and automatically reset it to
come on the following day. Similarly, stop the alarm by pressing ALM 2 button when Alarm 2 sounds.
TO USE THE SNOOZE ALARM
When alarm sounds, presses the SNOOZE/LIGHT once, the alarm will be silenced and come on again
according to the set snooze duration.
TO USE THE HI-LO DIMMER
This clock radio features an adjustable display backlight with dim, medium and bright settings. To
select a backlight setting, press the SNOOZE/LIGHT button until the brightness is reached. This
setting can only be selected when the radio is not playing.
Note: Please note the always-on backlight will not work while the clock is operating on battery power.
TO SET UP THE FM ANTENNA
Extend the FM wire antenna fully and vary the direction for best FM reception. Do not strip, alter or
attach to other antennas.
TO TUNE AND PLAY THE RADIO
1. Press SLEEP/RADIO, the clock display will show “ON” and flashes.
2. Then press or to tune into a desired radio station. To scan the stations, press or
for a few seconds and release. The radio will search and stop on the next strong station.
Remark: keep your radio away from fluorescent lamps, which may cause interference to the
radio.
3. You may also use the MEMORY function to select a preset radio station. See the TO USE THE
MEMORY SET FUNCTION.
4. Rotate the VOLUME dial to adjust the volume level.
5. Press SNOOZE/LIGHT button to turn off the radio.
17