www.sauservice.com 1ST PRINTING MAY ‘04 ® A Game of Skill Owner’s Manual SEGA AMUSEMENTS USA, INC. MANUAL NO.
VISIT OUR WEBSITE!
BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING: To maintain the safety: To ensure the safe usage of the product, be sure to read the following before using the product. The following instructions are intended for the users, operators and the personnel in charge of the operation of the product. After carefully reading and sufficiently understanding the warning displays and cautions, handle the product appropriately.
Specification changes (removal of equipment, conversion and addition) not designated by SEGA are not allowed. The parts of the product include warning labels for safety, covers for personal protection, etc. It is very hazardous to operate the product by removing parts and or modifying the circuits. Should doors, lids and protective parts be damaged or lost, refrain from operating the product, and contact where the product was purchased from or the office herein stated.
TABLE OF CONTENTS BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING: TABLE OF CONTENTS INTRODUCTION OF THE OWNER’S MANUAL 1. HANDLING PRECAUTIONS .......................................................................................... 2. PRECAUTIONS CONCERNING INSTALLATION LOCATION ................................... 3. OPERATION ..................................................................................................................... 4. ASSEMBLING AND INSTALLATION ......................
Installation Space Height Width Length Weight Power, maximum current Monitor SPECIFICATIONS : : : : : : 25.5 inches width X 48 inches deep 79 inches 25.5 inches 24 inches 200 lbs 600 W 5 A (AC 120V 60 Hz AREA) : NO MONITOR USED FOR THIS GAME INTRODUCTION OF THE OWNERS MANUAL This Owner's Manual is intended to provide detailed descriptions together with all the necessary information covering the general operation of electronic assemblies, electromechanicals, servicing control, spare parts, etc.
DEFINITION OF LOCATION MAINTENANCE MAN AND SERVICEMAN WARNING! Non-technical personnel who do not have technical knowledge and expertise should refrain from performing such work that this manual requires the location's maintenance man or a serviceman to carry out, or work which is not explained in this manual. Failing to comply with this instruction can cause a severe accident such as electric shock.
IMPORTANT MERCHANDISING TIPS FOR BEST RESULTS, ARRANGE PREMIUM PLUSH TOYS, HIGH PERCEIVED VALUE TOYS AND PRIZES ATTRACTIVELY WITHIN THE PRIZE DISPLAY BIN. PRIZES SHOULD BE ARRANGED WITHIN THE DISPLAY BIN TO OFFER THE PLAYER AN ENTICING AND DIVERSE SELECTION OF PRIZES AVAILABLE. ALWAYS BLEND A VARIETY OF PRIZE CAPSULES IN YOUR GAME TO APPEAL TO A BROAD RANGE OF MALE AND FEMALE PLAYERS. A GAME THAT DISPLAYS PRIMARILY TEDDY BEAR PLUSH FOR EXAMPLE, MAY ONLY APPEAL TO A SPECIFIC PLAYER GROUP.
1. HANDLING PRECAUTIONS When installing or inspecting the machine, be very careful of the following points and pay attention to ensure that the player can enjoy the game safely. Non-compliance with the following points or inappropriate handling running counter to the cautionary matters herein stated can cause personal injury or damage to the machine. WARNING! ● Before performing work, be sure to turn power off. Performing the work without turning power off can cause an electric shock or short circuit.
STOP IMPORTANT! ● For the IC board circuit inspections, only the logic tester is allowed. The use of a multiple-purpose tester is not permitted, so be careful in this regard. ● Static electricity from your body may damage some electronics devices on the IC board. Before handling the IC board, touch a grounded metallic surface so that the static electricity can be discharged. ● Some parts are the ones designed and manufactured not specifically for this game machine.
2. PRECAUTIONS CONCERNING INSTALLATION LOCATION WARNING! This product is an indoor game machine. Do not install it outside. Even indoors, avoid installing in places mentioned below so as not to cause a fire, electric shock, injury and or malfunctioning. ● Places subject to rain or water leakage, or places subject to high humidity in the proximity of an indoor swimming pool and or shower, etc. ● Places subject to direct sunlight, or places subject to high temperatures in the proximity of heating units, etc.
Operation Area WARNING! STOP ● For the operation of this machine, secure a minimum area of 25.5 in. (W) × 48 in. (D). In order to prevent injury resulting from the falling down accident during game play, be sure to secure the minimum area for operation. ● Be sure to provide sufficient space so as to allow this product's ventilation fan to function efficiently. To avoid machine malfunctioning and a fire, do not place any obstacles near the ventilation opening.
3. OPERATION PRECAUTIONS TO BE HEEDED BEFORE STARTING THE OPERATION To avoid injury and trouble, be sure to constantly give careful attention to the behavior and manner of the visitors and players. In order to avoid accidents, check the following before starting the operation: WARNING! ● To ensure maximum safety for the players and the customers, ensure that where the product is operated has sufficient lighting to allow any warnings to be read.
CAUTION! WARNING! ● Immediately stop such violent acts as hitting and kicking the product. Such violent acts can cause parts damage or falling down, resulting in injury due to fragments and falling down. ● Do not put any heavy item on this product. Placing any heavy item on the product can cause a falling down accident or parts damage. ● Do not climb on the product. Climbing on the product can cause falling down accidents. To check the top portion of the product, use a step.
4. ASSEMBLING AND INSTALLATION WARNING! CAUTION! ● Perform assembly work by following the procedure herein stated. Failing to comply with the instructions can cause electric shock hazard. ● Perform assembling as per this manual. Since this is a complex machine, erroneous assembling can cause an electric shock, machine damage and or not functioning as per specified performance. ● When assembling, be sure to use more then one person.
25.5 in. Vent approx. 8 in. 48 in. FIG. 6. 2 e Provide ventilation space for the ventilation opening. Allow more than 28 in. of space for customer traffic. www.seuservice.
POWER SUPPLY, AND EARTH CONNECTION WARNING! ● Be sure to independently use the power supply socket outlet equipped with an Earth Leakage Breaker. Using a power supply without an Earth Leakage Breaker can cause a fire when electric leakage occurs. ● Ensure that the "accurately grounded indoor earth terminal" and the earth wire cable are available (except in the case where a power cord plug with earth is used). This product is equipped with the earth terminal.
5. PRECAUTIONS WHEN MOVING THE MACHINE WARNING! CAUTION! ● When moving the machine, be sure to unplug the power plug. Moving the machine with the plug as is inserted can damage the power cord and cause fire and electric shock hazards. ● When moving the machine on the floor, pay careful attention so that adjusters do not tread power cords and earth wires. Damaging the power cords can cause electric shock and short circuit hazards.
6. NAME OF PARTS Playfield Plex Player Score Moving Handle Play Field Shooter Mech. Display Bin Coin Door Optional Bill Acceptor Door Service Door Cashbox Power Inlet Prize Outlet Wheels TABLE 4 Dimensions and Weights CABINET When assembled Width x Length x Height 29.25 in x 24 in x 79 in 29.25 in x 24 in x 90 in 11 Weight 200 LBS 200 LBS www.seuservice.
7. GAME DESCRIPTION The following explanations apply to the case the product is functioning satisfactorily. Should there be any moves different from the following contents, some sort of faults may have occurred. Immediately look into the cause of the fault and eliminate the cause thereof to ensure satisfactory operation. When the power is connected, the fluorescent lamps light up, and the game enters a test mode.
8. HOW TO PLAY ● After enough coins/tokens are inserted into the coin/credit slot, the game begins to run. The Player is given 4 shots to beat the Top displayed score. Insert Coins/Tokens ● The player then grasps the plunger and attempts to shoot the ball with the proper force to score highly. Shoot Ball ● The goal is to beat the “top score”, within 4 shots, by placing the ball through the various passages on the playing field.
9. Game Settings and Game Test Game Settings Auger Down Note: Switches can be used only with the door open, so the door switch must be connected to perform these 4 functions.
Factory reset setting is used to clear any accumulated superball or capsule wins which may have accumulated in a game that has run out of prizes. The operator turns off the power to the game, sets this setting and returns the power which resets the game and clears any unpaid prizes. The operator then turns the power off, returns the setting to ‘Normal’ and resumes play.
10. DESIGN RELATED PARTS Playfield Cover Plex GS 999-2036 Decal Playfield GS 999-2037 Triangle Sensor Cover GS 999-2038 Shooting Sensor Cover GS 999-2039 Oval Sensor Cover GS 999-2040 Decal Get Prize GS 999-2041 www.seuservice.
11. PARTS Playfield (P 1/3) 1 16 2 15 4 5 6 8 7 9 10 11 12 13 14 3 17 www.seuservice.
Playfield Item Number (P 2/3) Part Number Description 1 Local Purchase 15” Coolwhite Fluorescent Bulb and Fixture 2 Local Purchase 4” 4Ohm 100W speaker 3 999-2046 Speaker Grill 4 999-2049 Playfield Standoff 5 999-2042 Playfield White Sensor 6 999-2043 Playfield Black Sensor 7 999-2044 Playfield Ball Guide Lower 8 999-2045 Playfield Ball Guide Right www.seuservice.
Playfield (P 3/3) Item Number Part Number Description Picture 9 999-2050 Plunger Shaft and Ball 10 999-2052 Plunger Lower Spring 11 999-2051 Pluger Guide 12 999-2053 Plunger Upper Spring 13 Local Purchase Plunger Washer .62in outside .4in inside .03in thick 14 Local Purchase Plunger E-Ring .67in outside .038in thick 15 998-0208 8 Digit LED Display 16 999-2047 Ball Guide Upper 19 www.seuservice.
Inside Door (P 1/2) 1 2 3 5 6 8 4 7 9 10 www.seuservice.
Inside Door (P 2/2) Item Number Part Number Description Picture 1 999-2054 Door Switch 2 998-0210 Gameboard CPU GS 3 998-0213 Sensor Harness no bulbs 4 998-0211 Light Control Board 5 999-2055 Door Position Plate 6 998-0212 Meter and Control Board 7 999-2062 Key and Latch GS No Picture Available 8 999-2063 Key Latch Plate No Picture Available 9 998-0209 Gate Solenoid 10 999-0264 Rope Light GS 11 Local Purchase Bulb C912 12 Local Purchase Bulb SLI 512 12V 20P 21 No
SuperBall Bin (P 1/1) NOTE: To access the Superball bin, you need to reach in through the coin door and unlatch the two latches located on the right and left insides located infront of the bin. After unsecuring these latches the yellow rest area can be raised up and pulled forward to remove. Then the Superball bin can be lifted out. NOTE: Ballhole goes on the right side looking into the bin on reassembly.
Superball Chute (P 1/1) 1 2 5 6 NOTE: This shelf is removed by unscrewing the two hex headed screws located on the left of the image then lifted out. 3 4 ITEM NO. PART NO. DESCRIPTION 1 2 3 4 5 6 999-2065 999-2066 999-2067 999-2068 999-2069 998-2070 Superball Switch Superball Tunnel Stirer Motor Gear Stirer Motor Coupler Stirer Motor Bracket Stirer Motor NOTE 23 www.seuservice.
Misc Parts (P 1/1) Item Number Part Number Description 1 998-2075 Auger Cap 2 3 999-2071 999-2079 Auger Bracket Auger Screw No Picture Available 4 999-2072 Auger Rod No Picture Available 5 6 999-2073 999-2074 No Picture Available 7 998-0214 8 998-0215 Auger Motor Auger Coupler Transformer 16V40Amp Small Transformer 12.
Warranty Your new Sega Product is covered for a period of 90 days from the date of shipment. This certifies that the Printed Circuit Boards, Power Supplies and Monitor are to be free of defects in workmanship or materials under normal operating conditions. This also certifies that all Interactive Control Assemblies are to be free from defects in workmanship and materials under normal operating conditions. No other product in this machine is hereby covered.
SEGA AMUSEMENTS USA, INC.
