Owner`s manual

OPTIONAL DOLLAR BILL ACCEPTOR

THE COIN DOOR ASSEMBLY USED ON

RALLY 2 Twin Version RALLY 2 Twin Version

RALLY 2 Twin Version

COMES EQUIPPED TO ACCEPT A DOLLAR BILL ACCEPTOR. ALL

NEEDED WIRING CONNECTIONS ARE CONVIENENTLY LOCATED INSIDE

THE GAME FOR THIS APPLICATION.

THE COIN DOOR CAN ACCCOMMODATE THE FOLLOWING

VALIDATORS:

HOLE POSITION#1 Mars 2000 series

(FORWARD-MOST POSITION)

HOLE POSITION#2 Mars 2000 series

DBV45 (JCM)

HOLE POSITION #3 CURRENTLY NOT USED

HOLE POSITION #4 DSI01*

*The back flange on the chute can be removed for hold position #4.

If the flange is not removed, it may interfere with the back of the

cabinent.

The frame and cashbox enclosure on this coindoor has been modified to accomodate a Mars 2000 series

upstacker. A 2000 series stacker can be added by simply removing the top two entry door and replacing it with a one

entry door with a cut-out for a stacker. This one entry door can be ordered through Coin Controls or one of Coin Controls

authorized distributors. The part number is 91-4000-01. The Mars stacker can be obtained through an autherized Mars

distibutor.