User's Manual
5
2W902R-SP:
Turn the remote over and unlock the battery cover by sliding the clear tab up. Slide the battery cover off,
revealing the AAA battery. IMPORTANT: Be sure to observe correct polarity when installing the battery.
1WG7R-SP:
Use a quarter or flat head screwdriver to pry the back cover off of the remote. You can insert the quarter
or flat head in the small slot at the bottom of the remote by the keychain loop. Carefully pry off the back
cover using caution that you do not damage the circuit board. Your battery size should be listed on the
battery. Battery size: Two (2) CR2016) Replacements can be purchased from your local Firstech dealer
or an electronics store.
2 Way Remote Button Functions
Button Duration Function / Description
<Insert
Lock
Icon>
Half
second
Locks doors and if equipped, arms the alarm.
4
seconds
Panic/vehicle locater (flashes vehicle’s parking lights and sounds siren and horn).
<Insert
Unlock
Icon>
Half
second
Unlocks doors and if equipped, disarms the alarm.
2.5
seconds
Run time extender. Resets the run time for Turbo Timer or Remote Start.
<Insert
Trunk
Icon>
2.5
seconds
Trunk release. Triggers the trunk release output and opens the vehicle’s trunk.
<Insert
Key
Icon>
Half
second
Car Check (updates vehicle status on remote) / Secure Auxiliary
2.5
seconds
Holding this button will start your vehicle. Repeat and this will shut your vehicle down.
<Insert
Function
Icon>
This button activates and deactivates multiple features. See the Function Button Menu table below for
complete details.
<Insert
Lock +
Unlock
Icon>
Half
second
Turns siren chirps on/off (Note: With the siren chirps off, it will still sound in the event the
alarm is triggered).
2.5
seconds
Turns the shock sensor on/off. (ALARM IT or MAX IT systems only)
<Insert
Function
and
Trunk
Icon>
Half
second
Valet mode (see Valet Mode Section for details)
2.5
seconds
Option programming menu 1. For use during installation.
<Insert
Function
and Key
Icon>
Half
second
Activates timer start mode. Timer start mode has multiple programmable settings: duration
settings, temperature settings and self start settings.
2.5
seconds
Option programming menu 2. For use during installation.
<Insert
Trunk
Half
second
Activates passive arming (vehicle will arm/lock 30 seconds after the vehicle is disarmed)