User's Manual

Changing any one of the settings may affect the operation of your Remote Car Starter.
Engine Run Time setting
Option Setting Condition
Disarm the vehicle with remote control transmitter.(Unlock)
Driver s door must be physically Open, Engine Stop, Ignition ON, Trunk Open and Hood Open.
Option Setting Instruction
- Under option setting condition, press button for 2 seconds.
Light and Horn of vehicle will activate according to Engine Run Time option.
Number of Indicator+ Horn Settings
1 Time 10 Mins (Default)
2 Times 5 Mins
Light Blinking during remote engine start
Option Setting Condition
Disarm the vehicle with remote control transmitter.(Unlock)
Driver s door must be physically Open, Engine Stop, Ignition ON, Trunk Open and Hood Open.
Option Setting Instruction
- Under option setting condition, press button for 2 seconds.
Light and Horn of vehicle will activate according to Light Blinking during remote engine start.
Number of Indicator+ Horn Status
1 Time Blink OFF (Default)
2 Times Blick ON
Pairing Remote Start Fob
The Remote Start Fobs in Remote Start Kit are already paired with the main module at the time of production.
There is no need to pair the Fobs at the time of the first installation.
1. When a new registration is needed
- When replacing a remote due to loss or malfunction of a remote.