User's Manual

1. When a new registration is needed

- When replacing a remote due to loss or malfunction of a remote.

- When replacing the main controller installed in the vehicle.

- When adding or changing the remote upon user’s need.

2. Pairing procedure

1) Open driver’s door and trunk.

2) Insert the key into the ignition. Turn the key from OFF to ON position 5 times within 5 seconds.

3) After step 2), within 5 seconds, Press button on the 1st Remote Start Fob 1 time.

4) After registering the 1st Remote Start Fob, within another 5 seconds, Press button on the next 2nd Remote Start Fob 1 time.

5) Verify that all Fobs are functioning correctly by performing Lock / Unlock function.

NOTE:

1) A system can recognize up to 3 remotes maximum.

2) If a new Fob, or additional Fob, is needed later, the Fob pairing process should be done with the original Fob or oldest available Fob.

RS Fob X1