User's Manual

V. Remote Icons

Common Icons – These icons are used on all systems that use this remote.

Lock/Arm – Unlock/Disarm

This icon indicates whether the alarm locked/armed or unlocked/disarmed. While armed, the system will monitor the doors, trunk, hood, shock

sensor, and aux inputs. If any of these inputs are triggered while the system is armed, the alarm will be triggered.

Trunk Release

This icon will be displayed when the trunk release function has been activated. By default, the system will be disarmed and the doors will unlock

before the trunk is released.

Signal Strength

This icon is displayed if the last communication to the vehicle was successful.

Valet Mode

This icon will be displayed while you are in Valet mode. While in valet mode, the system will not perform any functions other than panic and lock

or unlock. The alarm will not arm or disarm while locking or unlocking. If any other function is attempted, “Sleep” will be displayed. The system

will not monitor the alarm triggers while in Valet mode. There are various ways of activating Valet mode, please discuss your preference with

your installer.

Battery Indicator

This icon displays the remaining battery life left in 25% increments.

Clock

Displays current time, remote start runtime, turbo mode time remaining, inside temperature of the vehicle, battery voltage the vehicle, failure of

signal transfer.

Starter Icons – These icons are used on starter only or alarm/starter systems that use this remote.

Engine Running

This icon will be displayed while the vehicle is running when it has been remote-started. This icon will be displayed the entire time the vehicle is

running while the clock displays the remaining runtime.

Start Availability

This icon will be displayed when the vehicle is ready to be remote-started. If this icon is not displayed, you will not be able to remote-start the

vehicle.

Timer Mode

This icon will be displayed when Timer mode is active. Timer mode can be set up to start the vehicle every 1.5, 3, or 24 hours.

Alarm Icons – These icons are used on alarm only or alarm/starter systems that use this remote.

Siren

This icon will be displayed if the siren is turned on. Turning the siren off only applies to the chirps when arming, disarming, or remote-starting.