User's Manual

Quick Reference
Remote Maintenance – Battery Replacement
The only regular maintenance this system requires is remote control battery replacement. No
programming is required when replacing the battery.
Turn the remote over and unlock the battery cover by sliding the black button push. Slide the battery
cover off, revealing the AAA battery.
IMPORTANT: Be sure to observe correct polarity when installing the battery.
2 Way Remote Button Functions
Button
Duration
Description
Short(0.5 sec)
Locks doors and if equipped, arms the alarm.
Double
Unlocks doors and if equipped, disarms the alarm.
Long(2.5 sec)
Holding this button will start your vehicle. Repeat and this will
shut your vehicle down.
Short(0.5 sec)
Car Check (updates vehicle status on remote pager) / Secure
Auxiliary / Temperature Display / Vehicle Voltage Display /
Remote Voltage Display
Double
Accesses Remote Menu (Passive arming, Alert mode, etc)
See Remote Menu Table for details.
Short(0.5 sec)
Locks doors and if equipped, arms the alarm.
Double
Used as Auxiliary 1 and Sliding door right, Defrost function
according to the setting of AUX 1 Config in the remote menu.
Not available when set to OFF in AUX 1 Config of the remote
menu.
Long(2.5 sec)
Panic/vehicle locater (flashes vehicle’s parking lights and
sounds siren and horn).
Short(0.5 sec)
Unlocks doors and if equipped, disarms the alarm.
Double
Used as Auxiliary 2 and Sliding door left, Head lights function
according to the setting of AUX 2 Config in the remote menu.
Not available when set to OFF in AUX 2 Config of the remote
menu.
Long(2.5 sec)
Run time extender. Resets the run time for Turbo Timer or
Remote Start.
Short(0.5 sec)
LCD View
Long(2.5 sec)
Trunk release. Triggers the trunk release output and opens
the vehicle’s trunk.
Long(2.5 sec)
Option programming menu 1. For use during installation.
Long(2.5 sec)
Option programming menu 2. For use during installation.