User Manual

7 Charging
8 Learning to Ride
Wear an approved helmet and other protective gear
to minimize any possible injury.
1. Power on the scooter and check the
indicator lamp power level. Charge the
scooter if the battery level is low.
6 First Ride
There are safety risks when learning to ride the KickScooter. You must read the Safety
Instructions via the App before your first ride.
For your safety, your new KickScooter is not activated and will beep occasionally after Power
ON.
Until activated, the KickScooter maintains a very low riding speed, and can not be ridden
with full function. Install the App on your mobile device (with Bluetooth 4.0 or above),
connect to the KickScooter with Bluetooth, and follow the App instructions to activate your
KickScooter and enjoy the full performance.
Scan the QR code to download the App (iOS 8.0 or above, Android™ 4.3 or above).
Your KickScooter is fully charged when the LED on the charger changes from red (charging) to green (trickle charge).
Close the charge port cover when not charging.
2
1
Install the App and register/login. Power on the KickScooter. A blinking Bluetooth
icon indicates the KickScooter is waiting for a
connection.
3
4
Click “Vehicle”→“Search device” to connect to your
KickScooter.
The KickScooter will beep when the connection is
successful. The Bluetooth icon will stop blinking and
remain illuminated.
Follow the App instructions to active the KickScooter and learn how to ride safely.
You can now start to use your KickScooter, check the status with App, and interact with other users. Have fun!
WARNING
Do not connect the charger if the charge port or charge cable is wet.
ES4
Charge port
Close the charge
port cover when
finished.
Open the charge
port cover.
Insert the
charge plug.
ES1/ES2
Charge port
Charging step tips
Vehicle N Fans Club Me
Discover
08 09