User manual
Maintenance
myUTN User Manual 107
7.2 How to Reset the UTN Parameters to their
Default Values
It is possible to reset the UTN Server’s parameters to the default
values (factory settings). All previously configured parameter values
will be deleted in this process. Installed certificates will not be
deleted.
Resetting the parameters may lead to a change in the IP address of
the UTN server and the connection to the myUTN Control Center can
get lost.
When Is Resetting
Recommended?
You must reset the parameters, for example, if you have changed the
location of the UTN server and if you want to use the UTN server in
a different network. Before this change of location, you should reset
the parameters to the default settings to install the UTN server in
another network.
What Do You Want
to Do?
’Resetting Parameters via the myUTN Control Center’ Ö107
’Resetting Parameters via the InterCon-NetTool’ Ö108
’Resetting the Parameters via the Reset Button’ Ö108
By means of the reset button of the device you can reset the
parameters without entering the password.
Resetting Parameters via the myUTN Control Center
Proceed as follows:
1. Start the myUTN Control Center.
2. Select MAINTENANCE - Default settings.
3. Click Default settings.
ª The parameters are reset.