User manual

Appendix - Glossary
myUTN User Manual 115
Host Name
The host name is an alias for an IP address. The host name uniquely
identifies the UTN server in the network and makes it easier to
remember.
Gateway
Using a gateway, you can address IP addresses from external
networks. If you want to use a gateway, you can configure the
relevant parameter in the UTN server via the myUTN Control Center.
Subnet Mask
With the help of the subnet mask, large networks can be split up
into subnetworks. In this case, the user IDs of the IP addresses are
assigned to the various subnetworks. The UTN server is configured
not to use subnetworks by default. If you want to use a subnetwork,
you can configure the relevant parameter in the UTN server via the
myUTN Control Center.
Default Name
The default name of the UTN server is made up of the two letters 'IC'
and the device number. The device number consists of the last six
numbers of its hardware address.
The default name can be found in the myUTN Control Center or in
the InterCon-NetTool.
IC0001ff
Device number
Default name