User manual

Appendix - Parameter List
myUTN User Manual 120
Table 18: Parameter List - TCP port access
Table 19: Parameter List - UTN port
Parameters Value Default Description
protection
[Port access
control]
on/off off Enables/disables the locking
of the selected ports.
protection_test
[Test mode]
on/off on Enables/disables the test
mode.
The test mode allows you to
test the parameters set using
the access control. If the test
mode is activated, the access
protection remains active until
the UTN server is rebooted.
protection_level
[Security level]
protec_utn
protec_tcp
protec_all
protec_
utn
Specifies the port types to be
locked:
- UTN ports
- TCP ports
- all ports (IP ports)
ip_filter_on_1
~
ip_filter_on_8
[IP address]
on/off off Enables/disables an
exception from the port
locking.
ip_filter_1
~
ip_filter_8
[IP address]
valid IP address [blank] Defines elements that are
excluded from port locking,
using the IP address.
hw_filter_on_1
~
hw_filter_on_8
[MAC address]
on/off off Enables/disables an
exception from the port
locking.
hw_filter_1
~
hw_filter_8
[MAC address]
valid hardware
address
00:00:00:
00:00:00
Defines elements that are
excluded from port locking,
using the hardware address.
Parameters Value Default Description
utn_port
[UTN port]
1–9200
[1–4 characters; 0–9]
9200 Defines the number of the
UTN port.
utn_sslport
[UTN SSL port]
1–9443
[1–4 characters; 0–9]
9443 Defines the number of the
UTN SSL port.