User manual

Appendix - Parameter List
myUTN User Manual 122
Table 22: Parameter List - USB port
Table 23: Parameter List - DNS
utn_2vlan_1
~
utn_2vlan_8
[Allocate VLAN]
0–9
[1 character]
(see: Ö117)
0 Allocates a VLAN to the USB
port.
0 = every
1 = VLAN 1
2 = VLAN 2, etc.
9 = none
Parameters Value Default Description
utn_tag_1
~
utn_tag_8
[Name]
max. 32 characters
[a–z, A–Z, 0–9]
[blank] Freely definable description of
the USB device.
utn_comp_1
[Compression]
on/off off Disables/enables the data
compression for the USB
device that is connected to the
USB port (only myUTN-130).
utn_poff_1
~
utn_poff_8
[Active]
on/off off Disables/enables the power
supply for the USB port (i.e.
the USB device connected to
the port).
off = power on
on = power off
utn_postreset_1
~
utn_postreset_8
on/off off This parameter can only be
used after consultation with
the SEH support team.
Parameters Value Default Description
dns
[DNS]
on/off on Enables/disables the name
resolution via a DNS server.
dns_domain
[Domain name]
max. 255 characters
[a–z, A–Z, 0–9]
[blank] Defines the domain name of
an existing DNS server.
dns_primary
[Primary DNS
server]
valid IP address 0.0.0.0 Defines the IP address of the
primary DNS server.
Parameters Value Default Description