User manual

Appendix - Parameter List
myUTN User Manual 124
Table 25: Parameter List - Date/Time
Table 26: Parameter List - Description
admin_pwd
[Password]
8–64 characters
[a–z, A–Z, 0–9]
administr
ator
Defines the password of the
SNMP user group 2.
admin_rights
[Access rights]
--- [None]
readonly
readwrite
readwrite Defines the access rights of
the SNMP user group 2.
admin_hash
[Hash]
md5
sha
md5 Specifies the hash algorithm
of the SNMP user group 2.
admin_cipher
[Encryption]
--- [None]
aes
des
--- Defines the encryption
method of the SNMP user
group 2.
Parameters Value Default Description
ntp
[Date/Time]
on/off on Enables/disables the use of a
time server (SNTP).
ntp_server
[Time server]
max. 64 characters
[a–z, A–Z, 0–9]
pool.ntp.
org
Defines a time server via the
IP address or the host name.
The host name can only be
used if a DNS server was
configured beforehand.
ntp_tzone
[Time zone]
UTC, GMT, EST,
EDT, CST, CDT,
MST, MDT, P S T,
PDT, etc.
CET/CE
ST (EU)
The time zone is used to
equalize the difference
between the time received
over the time server and the
local time.
Parameters Value Default Description
sys_name
[Host name]
max. 64 characters
[a–z, A–Z, 0–9]
[blank] Specifies the host name of the
UTN server.
sys_descr
[Description]
max. 64 characters
[a–z, A–Z, 0–9]
[blank] Freely definable description
sys_contact
[Contact person]
max. 64 characters
[a–z, A–Z, 0–9]
[blank] Freely definable description
(of the contact person)
Parameters Value Default Description