User manual

Appendix - Parameter List
myUTN User Manual 128
Table 30: Parameter List - Notification (only myUTN-80 and later)
Parameters Value Default Description
trapto_1
trapto_2
[Address]
valid IP address 0.0.0.0 Defines the SNMP trap
address of the recipient.
trapcommu_1
trapcommu_2
[Community]
max. 64 characters
[a–z, A–Z, 0–9]
public Defines the SNMP trap
community of the recipient.
trapdev
[Send trap if USB
devices are
connected or
disconnected]
on/off off Enables/disables the sending
of SNMP traps after a USB
device was connected
to/removed from the UTN
server.
trappup
[Send trap if UTN
server is
restarted]
on/off off Enables/disables the sending
of SNMP traps when the UTN
server is restarted.
trapact
[Send trap if USB
devices are
activated or
deactivated]
on/off off Enables/disables the sending
of SNMP traps after a USB
device was
activated/deactivated.
mailto_1
mailto_2
[Email address]
valid email address
[max. 64 characters]
[blank] Defines the email address of
the recipient for notifications.
noti_dev_1
noti_dev_2
[Send email if
USB devices are
connected or
disconnected]
on/off off Enables/disables the sending
of emails after a USB device
was connected to/removed
from the UTN server.
noti_act_1
noti_act_2
[Send email if
USB devices are
activated or
deactivated]
on/off off Enables/disables the sending
of emails after a USB device
was activated/deactivated.
noti_stat_1
noti_stat_2
[Status email]
on/off off Enables/disables the
periodical sending of a status
email to recipient 1 or 2.