User manual

Appendix - Additional Tool 'utnm'
myUTN User Manual 140
8.6 Additional Tool 'utnm'
utnm
The additional tool 'utnm' has been developed for the myUTN
products of SEH Computertechnik GmbH. It is used for the
activation and deactivation of USB devices.
Use
In order to activate or deactivate a USB device with utnm,
commands are entered and run in a special syntax in the
command-line interface of the operating system.
As an alternative, a script will be written for the USB device. The
script contains commands in a special syntax. When it is run, the
commands will be executed automatically step by step by the
command-line interpreter.
Benefits and
Purpose
When using utnm, it is not necessary to open and/or install the
interface of the SEH UTN Manager (minimal version of the SEH UTN
Manager Ö20).
Frequently recurring command sequences (e.g. a device activation)
can be automated by means of scripts. The execution of scripts can
be done automatically (e.g. by means of login scripts).
What Do You Want to
Do?
 ’Using the Command-Line Interface’ Ö140
 ’Creating Scripts’ Ö141
Using the Command-Line Interface
Requirements
; The SEH UTN Manager is installed on the client; see: Ö20 .
; The IP address or host name of a UTN server is known.
Proceed as follows:
1. Open the command-line interface.
2. Enter the command sequence; see ’Syntax and Commands’ Ö 141.
3. Confirm your entries.
ª The command sequence will be run.