User manual

Appendix - Additional Tool 'utnm'
myUTN User Manual 143
The following applies for the commands:
• UTN server = IP address or host name of a UTN server
• vendor ID = vendor ID of the USB device
• product ID = product ID of the USB device
• Elements in square brackets are optional
• not case-sensitive
• only the ASCII format can be read
p port number or
port port number
Uses an alternative USB port on the UTN server.
sp or
ssl-port
Uses an alternative USB port on the UTN server with SSL
encryption.
k USB port key
or
key USB port key
Specifies a USB port key.
In the course of the port key control a key is specified for the
USB port via the myUTN Control Center so that the USB
device that is connected to the USB port is protected against
unwanted access (
Ö86). In order to gain access to this
USB device, the appropriate key must be entered.
t seconds or
timeout seconds
Specifies a timeout for the command strings 'activate',
'deactivate', ’plugin’, 'plugout' and 'eject'.
nw or
no-warnings
Suppresses warning messages.
q or
quiet
Suppresses the output.
o or
output
Shows the output in the command line.
v or
version
Shows version information about utnm.
? or
help
Shows the help page.
Command Description