User manual

Administration Methods
myUTN User Manual 18
2.1 Administration via the myUTN Control Center
Which Functions Are
Supported?
The myUTN Control Center includes all features for the
administration and monitoring of the UTN server.
The myUTN Control Center is stored in the UTN server and can be
displayed by means of a browser software (Internet Explorer, Mozilla
Firefox, Safari).
Requirements
; The UTN server is connected to the network and the mains
voltage.
; The UTN server has a valid IP address.
Starting the myUTN
Control Center
Proceed as follows:
1. Open your browser.
2. Enter the IP address of the UTN server as the URL.
ª The myUTN Control Center appears.
If the myUTN Control Center is not displayed, check the proxy
settings of your browser.
The myUTN Control Center can also be started via the software tools
'SEH UTN Manager' and 'InterCon-NetTool'.
• To start the myUTN Control Center via the InterCon-NetTool,
mark the UTN server in the device list and select Actions –
Launch Browser from the menu bar.
• To start the myUTN Control Center via the SEH UTN Manager,
mark the UTN server in the selection list and select UTN Server –
Configure from the menu bar.