User manual
Administration Methods
myUTN User Manual 32
Syntax and Format
of an Instruction
Note the following syntax for instructions in the subject line:
cmd: <command> [<comment>]
The following commands are supported:
The following applies for the instructions:
• not case-sensitive
• one or more space characters are allowed
• max. length is 128 byte
• only the ASCII format can be read
Security with TAN
You will need a TAN for updates or parameter changes on the UTN
server. You will get a current TAN from the UTN server via email, e.g.
when receiving a status page. Enter the TAN into the first line of the
email body. A space character must follow.
Commands Option Description
<command> get status Sends the status page of the UTN server.
get parameters Sends the parameter list of the UTN server.
set parameters Sends parameters to the UTN server.
The syntax and values can be obtained from
the parameter list, see:
Ö116.
Parameter and value must be entered into the
email body.
update utn Carries out an automatic update using the
software that is attached to the mail.
help Sends a page containing information about the
remote maintenance.
[<comment>] Freely definable text for descriptions.