User manual
Network Settings
myUTN User Manual 51
Connecting the UTN Server to the Wired Network
To establish a connection to a wired network, connect the network
cable (RJ-45) to the UTN server. The UTN server automatically
switches to the wired network.
Channel
(Frequency Range)
Defines the channel (frequency range) on which the
entire data communication will be transmitted. The
product uses the 2.4 GHz ISM band. A channel has a
bandwidth of 22 MHz. The distance between two
neighboring channels is 5 MHz. Channel 3 is preset. The
parameter 'Channel' can only be configured in the
'Ad-Hoc' mode.
Neighboring channels overlap, which can lead to
interferences. If several WLANs are operated in a small
radius, a distance of at least five channels should exist
between two channels.
Keep yourself informed about national provisions
regarding the use of WLAN products and only use
authorized channels.
Encryption method
see: ’WLAN Security’ Ö47
Authentication method
see: ’Authentication’ Ö48
Parameters Description