User manual
Device Settings
myUTN User Manual 53
4.1 How to Determine a Description
You can assign freely definable descriptions to the UTN server. This
gives you a better overview of the devices available in the network.
Proceed as follows:
1. Start the myUTN Control Center.
2. Select DEVICE - Description.
3. Enter freely definable names for Host name, Description and
Contact person.
4. Click Save & Restart to confirm.
ª The data is saved.
To assign names to the connected USB devices, see: Ö55.
4.2 How to Configure the Device Time
You can control the device time of the UTN server via a time server
(SNTP server) in the network. A timeserver is a computer networking
device that reads the actual time from a reference clock and
distributes this information to its clients. In the UTN server, the time
server is defined via the IP address or the host name.
UTC
The UTN server uses 'UTC' (Universal Time Coordinated) as a basis.
UTC is a reference time and used as a time standard.
Time Zone
The time received by the time server does not necessarily correspond
to your local time zone. Deviations from your location and the
resulting time difference (including country-specific particularities
such as Daylight Saving Time) can be handled by means of the 'Time
zone' parameter.
Requirements
; A time server is integrated into the network.
Proceed as follows:
1. Start the myUTN Control Center.
2. Select DEVICE - Date/Time.