User manual

Device Settings
myUTN User Manual 55
4.4 How to Assign a Name to a USB Device
You can assign any name to the USB device. This gives you a better
overview of the devices available in the network.
Proceed as follows:
1. Start the myUTN Control Center.
2. Select DEVICE – USB port.
3. Enter the preferred name into the Name field.
4. Click Save to confirm.
ª The settings are saved.
4.5 How to Control the Power Supply for a USB Port
(only myUTN-80 and later)
You can enable or disable the power supply of a USB port. This
allows you to establish or interrupt the power supply for a USB
device.
The power supply for the USB ports is enabled by default.
Benefits and
Purpose
This function allows you to turn a USB device on or off without
having to manually remove or reconnect it. USB devices that are in
an undefined state, can be restarted by interrupting and
re-establishing the power supply of the USB ports.
Proceed as follows:
1. Start the myUTN Control Center.
2. Select DEVICE – USB port.
3. Tick/clear Active.
4. Click Save to confirm.
ª The power supply of the USB port is established or interrupted.